Low-Cost Sensor for Continuous Measurement of Brix in Liquids
Loading...
Date
25/11/2022
Open Access Location
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
MDPI AG
Rights
Abstract
This paper presents a Brix sensor based on the differential pressure measurement principle. Two piezoresistive silicon pressure sensors were applied to measure the specific gravity of the liquid, which was used to calculate the Brix level. The pressure sensors were mounted inside custom-built water-tight housings connected together by fixed length metallic tubes containing the power and signal cables. Two designs of the sensor were prepared; one for the basic laboratory testing and validation of the proposed system and the other for a fermentation experiment. For lab tests, a sugar solution with different Brix levels was used and readings from the proposed sensor were compared with a commercially available hydrometer called Tilt. During the fermentation experiments, fermentation was carried out in a 1000 L tank over 7 days and data was recorded and analysed. In the lab experiments, a good linear relationship between the sugar content and the corresponding Brix levels was observed. In the fermentation experiment, the sensor performed as expected but some problems such as residue build up were encountered. Overall, the proposed sensing solution carries a great potential for continuous monitoring of the Brix level in liquids. Due to the usage of low-cost pressure sensors and the interface electronics, the cost of the system is considered suitable for large scale deployment at wineries or juice processing industries.
Description
(c) The Author/s
Keywords
Brix sensor, differential pressure, hydrometer, pressure sensor, specific gravity, wine fermentation, Fermentation, Carbohydrates, Sugars
Citation
Sensors (Basel), 2022, 22 (23)